Heat-Shrink Solder Connectors (5 pcs)
CHF 2.95
Shipping:Ready to ship
Quantity
1
Total PriceCHF 2.95
Free shipping over 100 CHF (Switzerland only)
Trusted by hundreds of riders
Secure payment
Description
Waterproof wire connectors without a soldering iron: insert the wires, heat with a lighter or hot air, done. The solder inside joins the wires and the heat shrink seals the joint at the same time. Ideal when you connect turn signals, a tail light or a plate holder and have no soldering station at hand.
- No soldering iron needed
- Waterproof to IP67, protects from water, dust and corrosion
- Strong, permanent connection
- Ideal for turn signals, tail light and other wiring on the bike
- Cheap, also as a spare in the toolbox
Fits every bike
In the box
- 5× solder connectors with heat shrink
Specifications
- Protection rating
- IP67
- Connection
- solder with heat shrink
Installation
- Strip the wire ends by about 1 cm and twist the strands lightly
- Insert the stripped wires from both sides so they overlap in the middle
- Heat with a lighter or heat gun until the solder melts and the tube shrinks
- Let it cool, then pull lightly on both wires to test the joint
Notes
- Hot air gives a more even result than an open flame.
Frequently bought together
Licence Plate Holder V3 – Beta
Folding licence plate holder with a built-in LED tail light, brake light and licence plate light, all E-approved. The adapter fits the original mounting holes of your Beta, so there's no drilling. A spring keeps the plate under tension so it doesn't rattle or sag, even with vibration.
CHF 69.95In Stock
Licence Plate Holder V3 – KTM
Folding licence plate holder with a built-in LED tail light, brake light and licence plate light, all E-approved. The adapter fits the original mounting holes of your KTM, so there's no drilling. A spring keeps the plate under tension so it doesn't rattle or sag, even with vibration.
CHF 69.95In Stock
Turn Signal Extension M8
Extension for turn signals on the RevSticks licence plate holder. It brings your indicators to 18 cm apart, as Switzerland and the EU require. You screw it between holder and indicator without changing anything on the wires.
CHF 3.90In Stock
LED Turn Signal Set (4 pcs) with Resistors
Four compact, E-approved LED turn signals plus the matching resistors. The indicators look much slimmer than the big stock indicators and fit practically any bike, including our plate holders. The resistors make them flash at the normal rate after converting from bulbs.
CHF 59.95In Stock