LED Indicators
💡 Mini LED Indicators for Your Supermoto – Small, Bright & Stylish!
Revsticks presents: the Mini LED Indicators!
If you want to upgrade your Supermoto to look cleaner, slimmer, and more modern – these small powerhouses are for you. 🚀
🔥 Why Mini LED Indicators Are Better
✅ Compact Design: Perfect for a minimalist look – no more bulky stock indicators.
✅ High Brightness: Much brighter than traditional bulbs.
✅ Low Power Consumption: Saves energy and reduces strain on the electrical system.
✅ Long Lifespan: LEDs often last over 30,000 hours!
✅ E-Mark Approved: Our indicators have an E-mark and are street legal, as long as the flashing frequency is correct!
✅ Modern Style: Gives your KTM EXC, Husqvarna, or Beta a sporty, aggressive appearance.
🧰 What You Need for the Conversion
| Part | Description |
|---|---|
| 💡 Mini LED Indicators | Replace the stock ones |
| 🔌 Load-Independent Relay or Resistors (10W 10Ω) | To correct flash rate |
| 🔧 Connectors / Heat Shrink Tubes | For proper wiring |
💡 Tip:
You only need one – either the relay or resistors.
Using both isn’t necessary!
⚙️ Step-by-Step Installation (Example: KTM EXC)
1️⃣ Remove old indicators
Disconnect and unscrew the old ones, noting the wire colors.
2️⃣ Mount new Mini LED Indicators
Install and tighten them. Ensure correct alignment – front slightly outward, rear slightly backward.
3️⃣ Connect wiring
Use waterproof connectors or heat shrink for durability.
4️⃣ Adjust flash rate
If flashing is too fast, add 10W 10Ω resistors or replace with a load-independent relay.
Only correct flash frequency makes the setup road legal!
5️⃣ Test everything
Turn ignition on and test both sides. ✅ Installation complete!
🏁 Conclusion
Mini LED Indicators are the ultimate mix of style, safety, and technology.
With Revsticks accessories – like 10W 10Ω resistors or the load-independent relay – installation is easy and reliable.
Make your Supermoto stand out – with Mini LED Indicators by Revsticks. 🔥
🔗 Our Products
| Product | Description | Link |
|---|---|---|
| 💡 4x LED Indicators with Load-Independent Relay Set | Complete kit for correct flash rate | View Product |
| ⚡ 4x LED Indicators with 4x 10 Ohm 10 Watt Resistors | Perfect if you keep your original relay | View Product |
| 💡 2x LED Indicators | Replacement or extension for your setup | View Product |
| ⚙️ 2x 10 Ohm 10 Watt Resistors | Adjusts flashing speed | View Product |
| 🔁 Load-Independent Relay | Ensures steady flash rate for LED indicators | View Product |
Revsticks – Ride different. Look better.