Side Stand Foot – KTM EXC, Husqvarna TE/FE, GasGas EC/EX
CHF 5.90
Shipping:Ready to ship
Custom Options
Quantity
1
Total PriceCHF 5.90
Free shipping over 100 CHF (Switzerland only)
Trusted by hundreds of riders
Secure payment
Description
Foot for your stock side stand. The rubbery material gives much more grip, so the stand no longer slides on tarmac and the bike doesn't tip over. At the same time the larger surface spreads the weight better when you park on softer ground.
- Rubbery material, doesn't slip on tarmac
- Sits firmly on the stock side stand
- Robust and weatherproof
- Colour of your choice
Fits: GasGas, Husqvarna, KTM· 49 models
- GasGas EC 250 (2021–2026), EC 250F (2021–2026), EC 300 (2021–2026), EC 350F (2021–2026), EC 450F (2021–2026), EX 250 (2021–2026), EX 250F (2021–2026), EX 300 (2021–2026), EX 350F (2021–2026), EX 450F (2021–2026)
- Husqvarna FE 250 (2013–2027), FE 350 (2013–2027), FE 450 (2013–2027), FE 501 (2013–2027), TE 125 (2013–2027), TE 150 (2020–2027), TE 250 (2014–2027), TE 250I (2018–2023), TE 300 (2013–2027), TE 300I (2018–2023), TX 125 (2017–2019), TX 250 (2017–2022), TX 300 (2017–2022)
- KTM EXC 125 (2012–2023), EXC 150 (2017–2027), EXC 200 (2012–2016), EXC 250 (2012–2027), EXC 250 TPI (2018–2023), EXC 300 (2012–2027), EXC 300 TPI (2018–2023), EXC 450 (2012–2016), EXC 500 (2012–2016), EXC-F 250 (2012–2027), EXC-F 350 (2012–2027), EXC-F 450 (2017–2027), EXC-F 500 (2017–2027), XC-W 125 (2012–2019, 2024–2027), XC-W 150 (2024–2027), XC-W 200 (2012–2016), XC-W 250 (2012–2016, 2024–2027), XC-W 250 TPI (2019–2023), XC-W 300 (2012–2016, 2024–2027), XC-W 450 (2012–2016), XC-W 500 (2012–2016), XCF-W 250 (2012–2016), XCF-W 350 (2012–2016), XCF-W 450 (2012–2016), XW-F 350 (2024), XW-F 500 (2024)
In the box
- 1× side stand foot
Specifications
- Made by
- 3D printing in Switzerland
- Material
- rubbery, non-slip
- Fitting
- screwed to the stock side stand
Installation
- Fold out the side stand and clean the foot
- Place the side stand foot from below and screw it on
- Park the bike and check that it stands securely
Notes
- Before buying, compare the product photos with your side stand so shape and size match.
- Check now and then that the screw is still tight, especially after off-road rides.
- On very soft ground such as grass or sand, still use a pad under the stand.
Frequently bought together
Heat-Shrink Solder Connectors (5 pcs)
Waterproof wire connectors without a soldering iron: insert the wires, heat with a lighter or hot air, done. The solder inside joins the wires and the heat shrink seals the joint at the same time. Ideal when you connect turn signals, a tail light or a plate holder and have no soldering station at hand.
CHF 2.95In Stock
Reflector, E-approved
Reflector with an official E-mark, made to suit the RevSticks licence plate holders. Either screw-on or with adhesive tape. A rear reflector is required on the road, and with this one your rear stays slim anyway.
CHF 12.95In Stock
Valve Caps (2 pcs)
Valve caps for front and rear. They keep dirt, dust and moisture away from the tyre valve, sit firmly and give your bike a clean detail. Off-road especially, mud builds up at the valve quickly.
CHF 5.90In Stock
Turn Signal Extension M8
Extension for turn signals on the RevSticks licence plate holder. It brings your indicators to 18 cm apart, as Switzerland and the EU require. You screw it between holder and indicator without changing anything on the wires.
CHF 3.90In Stock