LED Turn Signal Set (4 pcs) with Resistors
CHF 59.95
Shipping:Ships in 8-14 days
Quantity
1
Total PriceCHF 59.95
Free shipping over 100 CHF (Switzerland only)
Trusted by hundreds of riders
Secure payment
Description
Four compact, E-approved LED turn signals plus the matching resistors. The indicators look much slimmer than the big stock indicators and fit practically any bike, including our plate holders. The resistors make them flash at the normal rate after converting from bulbs.
- 4 E-approved LED turn signals, much slimmer than stock
- Fits practically any bike with an M8 mount, including all RevSticks plate holders
- With resistors for the correct flash rate
- Cheaper than buying separately
Fits every bike
In the box
- 4× LED turn signal
- 4× resistor 10 ohms, 10 W
Specifications
- Thread
- M8
- Approval
- E-approved
- Resistors
- 10 ohms, 10 W
Installation
- Unscrew the stock indicators and fasten the new ones with the M8 nut
- Connect one resistor in parallel per indicator (positive and ground)
- Mount the resistors away from wires and plastic, as they get warm, and test all four indicators
Notes
- You usually only need the resistors if your bike had bulb indicators before. If LED indicators were already fitted, just leave them out.
Frequently bought together
Round Mirrors, E-approved (2 pcs)
Slim, round mirrors with an E-number, road legal. They replace bulky stock mirrors, look much sportier and are fully adjustable in angle. You screw them straight onto the handlebar, so your bike doesn't need a mirror mount for them.
CHF 29.95In Stock
Licence Plate Holder V3 – KTM
Folding licence plate holder with a built-in LED tail light, brake light and licence plate light, all E-approved. The adapter fits the original mounting holes of your KTM, so there's no drilling. A spring keeps the plate under tension so it doesn't rattle or sag, even with vibration.
CHF 69.95In Stock
Reflector, E-approved
Reflector with an official E-mark, made to suit the RevSticks licence plate holders. Either screw-on or with adhesive tape. A rear reflector is required on the road, and with this one your rear stays slim anyway.
CHF 12.95In Stock
Heat-Shrink Solder Connectors (5 pcs)
Waterproof wire connectors without a soldering iron: insert the wires, heat with a lighter or hot air, done. The solder inside joins the wires and the heat shrink seals the joint at the same time. Ideal when you connect turn signals, a tail light or a plate holder and have no soldering station at hand.
CHF 2.95In Stock