Licence Plate Holder V3 – Sherco
CHF 69.95
Shipping:Ships in 4-7 days
Custom Options
Quantity
1
Total PriceCHF 69.95
Free shipping over 100 CHF (Switzerland only)
Trusted by hundreds of riders
Secure payment
Description
Folding licence plate holder with a built-in LED tail light, brake light and licence plate light, all E-approved. The adapter fits the original mounting holes of your Sherco, so there's no drilling. A spring keeps the plate under tension so it doesn't rattle or sag, even with vibration.
- Direct fit: adapter for the original mounting holes, no drilling
- LED tail/brake light and licence plate light built in, all E-approved
- Spring mechanism: the plate is always under tension
- Two versions: Standard (quick to fold in with one hand) or Lock (locks firmly when folded out)
- Snap-in pin: remove the whole plate unit in seconds, e.g. for photos or a track day
- Angle adjustable with 4 spacers
- Drain holes so no water stays inside
- Turn signal extension available as an option (+ CHF 3.90)
Fits
- Sherco SE 125 (2025–2026), SE 250 (2025–2026), SE 300 (2025–2026), SEF 250 (2025–2026), SEF 300 (2025–2026), SEF 450 (2025–2026), SEF 500 (2025–2026)
In the box
- Licence plate holder with LED tail/brake light, licence plate light, folding pin and snap-in pin
- Mounting adapter for your model and year (selectable)
- 2× screws for the adapter (into the original mounting points on the rear fender)
- 2× screws for the plate holder on the adapter
- 4× spacers for the angle
Specifications
- Standard version
- spring-loaded, does not lock when folded out, so you can fold the plate in and out quickly with one hand.
- Lock version
- also spring-loaded, and additionally locks firmly when folded out so it won't fold in by itself.
- Lighting
- LED tail/brake light and LED licence plate light, E-approved
- Connector
- Mini Japan connector (male/female)
- Turn signal hole
- 8 mm, for M8 turn signals
- Drilling needed
- no
Installation
- Screw the adapter into the original plastic mounting points on the rear fender with 2 screws
- Fix the plate holder to the adapter with the other 2 screws
- Tools: screwdriver or Allen key, thread locker (e.g. Loctite) recommended
- The supplied connectors usually don't match your bike's original connectors. Either solder them or use matching adapters from our shop.
Notes
- Switzerland and the EU require at least 18 cm between the turn signals. The turn signal extension is available as an accessory for this.
- The tail light, brake light and licence plate light are E-approved. Whether the conversion is allowed on your vehicle, or needs an inspection, depends on your country and your vehicle. We can't guarantee approval or a passed inspection, so please check before fitting.
- Folded in, the plate is only meant for off-road, the track or storage. On public roads it must be folded out, easy to read and lit. You are responsible for following the rules in your country. RevSticks accepts no liability for fines or other consequences of improper use.
Frequently bought together
LED Turn Signal Set (4 pcs) with Relay
Four compact, E-approved LED turn signals plus a load-independent flasher relay. The indicators look much slimmer than the big stock indicators and fit practically any bike. The relay replaces your stock flasher relay so everything flashes at the right rate, without extra resistors.
CHF 44.95In Stock
Heat-Shrink Solder Connectors (5 pcs)
Waterproof wire connectors without a soldering iron: insert the wires, heat with a lighter or hot air, done. The solder inside joins the wires and the heat shrink seals the joint at the same time. Ideal when you connect turn signals, a tail light or a plate holder and have no soldering station at hand.
CHF 2.95In Stock
Small LED Turn Signals, E-approved (2 pcs)
Compact LED turn signals with an E-number. They look much slimmer and cleaner than big stock indicators and fit practically any bike, including our licence plate holders. As a pair for one end, front or rear.
CHF 18.90In Stock
LED Turn Signal Set (4 pcs) with Resistors
Four compact, E-approved LED turn signals plus the matching resistors. The indicators look much slimmer than the big stock indicators and fit practically any bike, including our plate holders. The resistors make them flash at the normal rate after converting from bulbs.
CHF 59.95In Stock